Section: Module 5: Fluids and Solids | Physics | NextGenU.org

  • Competencies covered in this module:

    Importance of fluids for the circulation of blood, gas movement, and gas exchange.

    • Module 5: Lesson 1: Fluids, Density, and Surface Tension

      Learning Objectives:

      Upon completion of this lesson, you will be able to:

      • Describe the characteristics of the phases of matter at the molecular or atomic level.
      • Define density.
      • Define and understand the rationale behind cohesion and adhesion.

      Approximate time required for the readings for this lesson (at 144 words/minute): 42 minutes.

      Required Learning Resources and Activities
    • Read the entire page. (16 minutes)

      The LibreTexts Physics - 2022

    • Read the entire page. (5 minutes)

      The LibreTexts Physics - 2020

    • Module 5: Lesson 2: Hydrostatic Pressure and Pascal's Law

      Learning Objectives:

      Upon completion of this lesson, you will be able to:

      • Define density and pressure, and understand the relationship between depth in a fluid and hydrostatic pressure.
      • Apply Pascal's law to a hydraulic system.

      Approximate time required for the readings for this lesson (at 144 words/minute): 3 hours and 42 minutes.

      Required Learning Resources and Activities
    • Read the entire page and watch the videos. (81 minutes)

      The LibreTexts Physics - 2020

    • Step 1. Review

      Review the learning resources for this lesson before studying the case problem.

      Step 2. Analyze
      Analyze the case problem below.

      Directions and Questions: 

      1. Navigate to the Wave Addition simulation with PhET at:

      https://phet.colorado.edu/sims/html/under-pressure/latest/under-pressure_en.html


      1. Push the big Play arrow. Start with the default settings. In addition, fill the tank with water and select “Ruler”, like the diagram to the right. 

      2. Click on the pressure gauge to move it toward the water. Measure the pressure in the water at every 0.50 m from the surface to the bottom. Record your results on the table below. Note that the simulation will give you kPa. Convert to Pa before entering the values on the table.

      48

      4. Use Excel, or similar, to make a graph of pressure vs depth. Do a linear best fit and include the equation on the graph. Copy and paste your graph and equation below.

              a. What is the physical meaning of the slope? 

      b. What is the physical meaning of the y-intercept?

      5. Now, pick a depth and vary the fluid density from 700 to 1,400 kg/m3. Record your results on the table below. Note that the simulation will give you kPa. Convert to Pa before entering the values on the table. My chosen depth was:

      3955

      6. Use Excel, or similar, to make a graph of pressure vs density. Do a linear best fit and include the equation on the graph. Copy and paste your graph and equation below

      7. Click on the icon with the question mark on the sink to access the mystery fluid portion. Determine the density of a mystery fluid. If your last name starts with A-H, test Fluid A. If your last name starts with I-N, test Fluid B. If your last name starts with O-Z, test Fluid C. Describe your method and results below.

      8. Based on what you learned in this activity, what is the formula for determining the pressure in a fluid? State what each of the symbols mean.

      Step 3. Respond
      Write a 300-word summary of your lab and your reflections on it. Include the answers to the questions given above.

      Step 4. Share
      To share your work, click on the “Reply” button under this post and paste your work into the “Message” box. Make sure to reference others’ intellectual property when necessary. All references should follow 7th Edition APA formatting. For further instructions, see the resource on the Himmelfarb Health Sciences Library: APA citation resource (N.B. references are excluded from word counts).

      Step 5: Interact
      To complete the activity, evaluate and categorize the work from one of your peers based on items A - D of this rubric. Provide a rationale for your grade and comments or suggestions for improvement. To post a reply, click “Reply” on a particular discussion, write your feedback, then click “Post to forum.” You can use the list below as an example:

      Item A is  .…. because….  My suggestions for improvement are….
      Item B is  .…. because….  My suggestions for improvement are….
      Item C is  .…. because….  My suggestions for improvement are….
      Item D is  .…. because….  My suggestions for improvement are….

      OPTIONAL Step 6: Interact (10 minutes)

      If you would like to, you can reply to your peers' posts in a respectful and professional manner. Ensure that your post engages your peers' ideas by including a reflection on their comments, sharing ideas of other potential difficulties and parties involved, or asking thought-provoking questions. If a peer comments on your posting, please reply. To post a reply, click “Reply” on a particular discussion, write your feedback and then click on “Post to forum.”

      OPTIONAL Step 7: Interact (10 minutes)

      If you would like to, you can reply to your peers' posts in a respectful and professional manner. Ensure that your post engages your peers' ideas by including a reflection on their comments, sharing ideas of other potential difficulties and parties involved, or asking thought-provoking questions. If a peer comments on your posting, please reply. To post a reply, click “Reply” on a particular discussion, write your feedback and then click on “Post to forum.”



    • Module 5: Lesson 3: Archimedes' Principle and Fluid Dynamics

      Learning Objectives:

      Upon completion of this lesson, you will be able to:

      • Understand Archimedes' principle and calculate buoyant force and specific gravity.
      • Use the continuity equation to calculate the flow rate from area and velocity.

      Approximate time required for the readings for this lesson (at 144 words/minute): 1 hour and 12 minutes.

      Required Learning Resources and Activities
    • Read the entire page and watch the videos. (25 minutes)

      The LibreTexts Physics - 2020

    • Read the entire page and watch the videos. (11 minutes)

      The LibreTexts Physics - 2020

    • Module 5: Lesson 4: Bernoulii's Equation and Venturi Effect

      Learning Objectives:

      Upon completion of this lesson, you will be able to:

      • Perform calculations using Bernoulli's equation.
      • Apply Bernoulli's equation to a U/pitot tube.

      Approximate time required for the readings for this lesson (at 144 words/minute): 2 hours and 4 minutes.

      Required Learning Resources and Activities
    • Read the entire page and watch the videos. (49 minutes)

      The LibreTexts Physics - 2019

    • Read the entire page. (13 minutes)

      The LibreTexts Physics - 2022

    • Module 5: Lesson 5: Viscosity and Turbulence and Poiseuille's Law

      Learning Objectives:

      Upon completion of this lesson, you will be able to:

      • Define laminar and turbulent flow, calculate viscosity, and calculate flow using Poiseuille's law.

      Approximate time required for the readings for this lesson (at 144 words/minute): 50 minutes.

      Required Learning Resources and Activities
    • Read the entire page. (25 minutes)

      The LibreTexts Physics - 2022

    • Module 5: Lesson 6: Shear, Compression, Elasticity, and Plasticity

      Learning Objectives:

      Upon completion of this lesson, you will be able to:

      • Explain the concepts of stress and strain in describing elastic deformations of materials.
      • Describe the range where materials show plastic behavior and the limit where the deformation of materials is elastic.

      Approximate time required for the readings for this lesson (at 144 words/minute): 1 hour and 24 minutes.

      Required Learning Resources and Activities
    • Read the entire page. (17 minutes)

      The LibreTexts Physics - 2022

    • Read the entire page. (12 minutes)

      The LibreTexts Physics - 2022

    • Read the entire page. (8 minutes)

      The LibreTexts Physics - 2022

    • quiz icon
      Quiz: Module 5

      To access the quiz, click on the name of the quiz provided above. On the following screen, click the "Preview quiz now" button to respond to the questions.

      TO PASS THIS QUIZ YOU MUST OBTAIN A SCORE OF 80%.

      Not available unless: The activity Quiz: Module 4 is marked complete